CAS 9046-10-0
Polyoxypropylenediamine safety data sheets
Polyoxypropylenediamine appears in 55 products from 26 manufacturers in our library, most often as a liquid.
Search for a specific productReported hazards
6 hazard classesHealth hazards
- Skin corrosion or irritationCauses skin irritation or burns.
- Serious eye damage or irritationCauses eye irritation or serious eye damage.
- Respiratory or skin sensitizationMay cause an allergic skin reaction or breathing problems.
- Acute toxicityHarmful or fatal if swallowed, inhaled or absorbed through skin.
- Specific target organ toxicityMay damage organs through single or repeated exposure.
- Reproductive toxicityMay damage fertility or an unborn child.
These are the hazards most often listed across the 55 products that contain Polyoxypropylenediamine. They describe each product as a whole, so they may not apply to Polyoxypropylenediamine by itself or to every product. Check the sheet for the product you use.
At a glance
- CAS number
- 9046-10-0
- Products
- 55
- Manufacturers
- 26
- Physical state
- liquid, solid
Manufacturers
- BASF Canada Inc.
- Dulux Protective Coatings Australia, a division of DuluxGroup (Australia) Pty Ltd
- GCP Applied Technologies
- ITW Performance Polymers
- Krylon Products Group
- LATICRETE International
- LATICRETE MIDDLE EAST LLC
- MG Chemicals
- MG Chemicals (Head Office)
- PPG Coatings Belgium BV/SRL
- PPG Industries, Inc.
- RUST-OLEUM EUROPE
- +14 more
Products containing Polyoxypropylenediamine
- 3333 Super Adhesive Primer - Base
- 8329TCM-B
- 832FX-B
- 834FX-B
- 976-H0313 DUREMAX HBE STANDARD PART B
- 976-H0341 DUREMAX HBE COLD CURE PART B
- AMERLOCK 2 CURE
- AMERLOCK 2 VOC CURE
- ARMORSEAL® 1000 HS Epoxy (Part A) Haze Gray
- ARMORSEAL® 8100 Epoxy (Part B) Hardener
Showing 10 of 55. Search the full library for a specific product.