CAS 135108-88-2

Formaldehyde, polymer with benzenamine, hydrogenated safety data sheets

Formaldehyde, polymer with benzenamine, hydrogenated appears in 26 products from 16 manufacturers in our library, most often as a liquid.

Search for a specific product

Reported hazards

6 hazard classes

Health hazards

Skin corrosion or irritationCauses skin irritation or burns.
Serious eye damage or irritationCauses eye irritation or serious eye damage.
Respiratory or skin sensitizationMay cause an allergic skin reaction or breathing problems.
Acute toxicityHarmful or fatal if swallowed, inhaled or absorbed through skin.
Specific target organ toxicityMay damage organs through single or repeated exposure.
Reproductive toxicityMay damage fertility or an unborn child.

These are the hazards most often listed across the 26 products that contain Formaldehyde, polymer with benzenamine, hydrogenated. They describe each product as a whole, so they may not apply to Formaldehyde, polymer with benzenamine, hydrogenated by itself or to every product. Check the sheet for the product you use.

At a glance

CAS number: 135108-88-2
Products: 26
Manufacturers: 16
Physical state: liquid, solid

Manufacturers

A.W. CHESTERTON COMPANY
Akzo Nobel Coatings, Inc.
Crossfield Products Corp.
ELECTROLUBE. A division of HK WENTWORTH LTD
ITW Performance Polymers
J-B Weld Company, LLC
LATICRETE International
MAPEI CORP. (USA and Puerto Rico)
PPG Coatings S.A.
PPG Industries, Inc.
Sherwin-Williams Protective & Marine
Sika Corporation
+4 more

Products containing Formaldehyde, polymer with benzenamine, hydrogenated

02GN084 BASE COMPONENT
80X109F CURING SOLUTION
ARC CS2 (Part B)
CCoololorrflfalakkee I MMO IM BOas,e Pcoaartt BHardener Part B
Colorflake M Basecoat Resin, Part B
DEVCON® Epoxy Coat™ 7000 AR (Acid Resistant) Hardener
DEVCON® Epoxy Concrete Sealer Hardener
Décor-Flor M Basecoat, Part B
Epigrip M922 Glass Flake Epoxy - Additive
General Primer Part B

Showing 10 of 26. Search the full library for a specific product.