CAS 71074-89-0
Bis[(dimethylamino)methyl]phenol safety data sheets
Bis[(dimethylamino)methyl]phenol appears in 26 products from 19 manufacturers in our library, most often as a liquid.
Search for a specific productReported hazards
6 hazard classesHealth hazards
- Skin corrosion or irritationCauses skin irritation or burns.
- Serious eye damage or irritationCauses eye irritation or serious eye damage.
- Respiratory or skin sensitizationMay cause an allergic skin reaction or breathing problems.
- Acute toxicityHarmful or fatal if swallowed, inhaled or absorbed through skin.
- Reproductive toxicityMay damage fertility or an unborn child.
- Specific target organ toxicityMay damage organs through single or repeated exposure.
These are the hazards most often listed across the 26 products that contain Bis[(dimethylamino)methyl]phenol. They describe each product as a whole, so they may not apply to Bis[(dimethylamino)methyl]phenol by itself or to every product. Check the sheet for the product you use.
At a glance
- CAS number
- 71074-89-0
- Products
- 26
- Manufacturers
- 19
- Physical state
- liquid, solid
Manufacturers
- Benjamin Moore & Co.
- Crossfield Products Corp.
- ITW Evercoat
- ITW Performance Polymers
- ITW Permatex
- J-B Weld Company, LLC
- LATICRETE International
- MAPEI CORP. (USA and Puerto Rico)
- MG Chemicals (Head Office)
- PPG Coatings S.A.
- RUST-OLEUM EUROPE
- Sika Corporation
- +7 more
Products containing Bis[(dimethylamino)methyl]phenol
- 5412 Epoxy Putty (activator)
- 8332-B
- DEVCON® 5-Minute® Epoxy Hardener
- HP FAST-CURE POLYAMIDE EPOXY SATIN - CATALYST
- KS35B Activator
- LATAPOXY 310 Stone Adhesive Part A Rapid
- Marine H2 Hold Epoxy Resin
- OEM Bead Seam Sealer Cartridge
- PLANISEAL VS PART B
- PLEXUS® H4110 Adhesive
Showing 10 of 26. Search the full library for a specific product.